SMT P&P Machine With Lighting Making

SMT P&P machine with lighting making

Product Description

The YT202 SMT pick and place machine can chip complex IC packages with a minimum size of 0201, such as CSP, BGA, PLCC, etc.

Adopt High-speed multi modular head,apply to ultra small chip 0201 ~10mm large Chip.wider component range.

Fixed high pixel flight vision camera:High-speed flight vision camera,quickly captures multiple head images at once, perform visual calibration of image position,alignment correction, adjustable light source brightness.

Two gantry, 10 spindles* *2 Gantry, total 20 spindles.

Flexible PCB handling capabilities,double rail,both gantry can mount the same large PCB at the same time.realizing flexible production.

Flexible wiring through modular placement heads and various production modes.

Parameter

Notes for smt industry using reflow soldering machine control program:

1. SMT reflow soldering should only be performed by licensed operators, technicians, engineers or other trained personnel.

2. The operator is not allowed to change the original parameters of each machine at will. The technicians in the SMT workshop of the production department can change some parameters according to different products, but before changing, they need to seek the consent of the SMT workshop engineer and make corresponding records.

3. Before starting SMT reflow soldering, confirm whether the power supply and origin of the machine can work normally.

4. When SMT reflow soldering is running, do not put your hands and feet in the safety cover.

5. During the operation or adjustment of SMT reflow soldering, two or more people are not allowed to operate the same machine.

7. In production, when the PCB is transported on the mesh belt or rail of the SMT reflow oven, the setting data and switches cannot be adjusted.

8. The working temperature of the SMT reflow oven is set in each temperature zone. According to the material and thickness of the PCB, the density of the components, the specifications of the components, and the characteristics of the solder paste, set the temperature and test the profile.

9. When the PCB will flow out of the SMT reflow oven, it is not allowed to put your hand into the oven to forcibly take out the product, otherwise it will cause cold welding and damage the installed components. Due to the high temperature, the operator must wear gloves to avoid hot hands when removing the board, and remove the product when the PCB is fully automatic out of the reflow oven.

10. When the products are put into the SMT reflow oven for soldering, the minimum distance between the products is greater than 10 cm. To save energy, do not turn on the power when the reflow oven is not producing or in urgent need.

11.SMT reflow soldering machine is a precision equipment. In order to ensure the normal operation of the equipment and product quality, the SMT workshop is a fully enclosed air-conditioned workshop, which must be equipped with good lighting, ventilation, temperature control and dust-proof facilities (exhaust fans, air conditioners, vacuum cleaners, etc.) to ensure a clean, bright and A comfortable working environment.

Hot Tags: smt p&p machine with lighting making, China, suppliers, manufacturers, factory, price, cheap, quotation, Low Cost 34 Heads Reel Making Mounter, 0201 Driver PCB SMT Pick And Place Machine, PCB Assembly Line For LEDchip Mounter, Mount Most LED Products SMT Mounter, 0 04mm Precision 45000CPH Mounter For Led, SMT Assembly Machine For Led Tube And Panel