Products

LED Bulb SMT Mounting Machine Including DOB
PCB size Maximum 450*350mm, minimum 80*80mm
10 nozzles, 42 Feida, ideal production capacity 40000CPH
Features
LED bulb SMT mounting machine including DOB
Product description
RT-1 LED light SMT pick and place machine, single module single system control, 10 nozzles per head, ideal production capacity 40000CPH,
The universal machine has powerful functions and is suitable for a variety of LED lights. The smallest SMD component is 0402, the highest SMD component is 15mm, the maximum size of the PCB board is 450*350mm, and the minimum is 80*80mm.
The production line can be flexibly configured, whether it is a semi-automatic production line that saves investment and reduces floor space, or a fully automatic production line that saves labor, we can provide professional wiring solutions; there is also a combination line that maximizes production capacity, no matter what it is produced.
Parameter
PCB Length Width | Max:450*350mm Min:80*80mm |
PCB Thickness | 0.1-6mm |
PCB Clamping | Pneumatic |
No. of Camera | 2 PCS Accurate image recognition Vision alignment, MARK correction |
Mounting Precision | ±0.04mm |
Mounting Height | ≦15mm |
Mounting Speed | 40000 CPH |
X,Y,Z Axis Drive way | High-end magnetic linear motor |
Precautions for automatic printing presses
The automatic solder paste printing machine is one of the most important parts of the SMT line, which is used to print PCB circuit boards.
The first step of the normal operation process is to fix it on the printing positioning table, and then use the left and right scrapers of the printing machine to print the solder paste or red glue on the corresponding pad through the stencil. The PCB with uniform leakage is input to the placement machine through the transfer table for automatic placement.
Notes (for FPC):
1. Find out the type and hardness of the scraper of the printing machine in advance.
2. Solder paste printing scraper
The squeegee is operated directly on the printing machine. Before printing, pay attention to the distance between the squeegee and the FPC. It is more appropriate to keep the angle between 60-75 degrees. Too large or too small will affect the printing effect.
3. Printing speed
The speed of the automatic solder paste printing machine should not be too fast during the printing process, which will make some places impossible to print. Of course, it can not be too slow, too slow will lead to uneven printing effect.
4. the printing pressure
If the printing pressure is too small, the amount of solder paste on the FPC will be insufficient, and if the pressure is too large, the solder paste will be printed too thin, and it may also cause the solder paste to contaminate the reverse side of the metal leakage board and the surface of the FPC.

Hot Tags: led bulb smt mounting machine including dob, China, suppliers, manufacturers, factory, price, cheap, quotation, SMT Mounter For DOB PCBA And PCB Driver, Economical 8 Zones Reflow Oven With 800KG, Automatic Glue Dispenser Machine HT D12 1200, 8 Zones Reflow Oven Mesh Belt 880 20mm, High Stability LED Bulbs Pick And Place Machine, High Precision SMT Chip Placing Mounter
You Might Also Like
Send Inquiry
